80F3[X]v2

The improved F_Series 80F3[X] ESCs. Building upon our trusted ARM 32-bit architecture, the V2 release features introduce a number of highly requested features into the product range, including configuration options, Bi-Directional DShot, and UART overvoltage protection. The 80F3[X]v2 ESCs are drop-in replaceable to 80F3[X] units. As before, existing features include PWM-frequency dithering and Active Phase-Current Demagnetisation, allowing for smooth control with virtually all powertrain combinations with peak power outputs of up to 4.7 kW.

NDAA/DFARS-compliant options available upon request.

New Feature Set (v2)

  • Configuration of drive parameters, signal types and fault handling

  • Bi-Directional DShot for RPM Filtering support

  • On board bootloader

  • Passthrough firmware updating and configuration

  • Additional Telemetry types: PWM Telemetry and RPM Output

  • High-speed telemetry rates when operating DShot and ProShot

  • Reversible operation support (full forwards to full reverse)

  • Dynamic signal quality checks across supported input protocols

  • Hardware protection for UART programming pins

Feature Set

  • Designed and manufactured in Australia using only the highest quality components, ensuring no sacrifice in reliability

  • Proprietary firmware designed in Australia

  • Plug and play firmware

  • Up to 8S (34 V) capable

  • Up to 80 A continuous* output current

  • 140 A Burst current

  • True 10-bit resolution

  • Virtually no setup time, with simple motor reverse solder tab

  • Auto-detect ProShot or DShot

  • ProShot1000 capable (1Mbs/s)

  • DShot150 to DShot600 capable (0.15-0.6Mbs/s)

  • Up to 750,000 eRPM (protocol dependant)

  • Motor agnostic

  • Auto PWM output frequency

  • Auto timing advance

  • Telemetry output

  • Automatic current limiting and over-temperature protection

  • LED indication

  • Digital commands over ProShot (including anti-turtle mode)

  • Digital commands over DShot

  • Bare-PCB design to allow maximum integration within the end setup

  • 8-Layer PCB to ensure minimal track resistance

* Continuous current ratings are at a 100% throttle duty cycle. Continuous rating is defined as max sustained current at 100% throttle for 60 seconds with 33 m/s of airflow.

Documentation and Datasheets can be found at: docs.powerdrives.net

Additional Information

Weight: 0.02kg

Dimensions: 44x22x12mm

Documentation: docs.powerdrives.net

CAD Model: 80F3 CAD Model

Learn more about 80F3[X]v2

80F3[X]